Accessories

Polished Chrome Mirror Adjusters
MGF MK1 with manual mirror adjustors including TF 1.6

Superb billet aluminium pedals CNC machined with anti slip grooves to fit the MGF. No drilling required when fitting. A unique product, only available from Mike Satur's.

** SPECIAL OFFER** Save £10.00 now only £30.00 per set

SAGGING DOORS??????
Rebuild your door hinges in just a few minutes with these Stainless Steel heavy duty bushes. The standard MGF/TF hinge has soft coated bushes that wear and cause the door to sag. By replacing the bushes with our new design you can restore door alignment.
(4 bushes per door per kit, to repair both doors order two kits)

Polished aluminium door lock pins comes as standard with anti rattle ring.

Polished aluminium door lock pins comes as standard with anti rattle ring.

Hand Brake Lever in dull matte Anodised Finish (picture shows polished) with choice of leather trim.
We can offer these in virtually any colour enablling you to add a stylish co-ordinated accessory that matches your luxury leather trim.
All chart colours in stock.
Please enquire if colour is not shown on chart to sales@mikesatur.com
Please note actual colours may vary slightly due to different display settings.

Please press MORE for COLOUR CHART:

**NEW OFFER - NORMAL RETAIL 28.00 - NOW ONLY £15.74 WHILST STOCKS LAST**

FX Hand Brake Lever, Polished finish.

This design replaces the complete knob and will fit all MGF cars up to Sept 1999. These will also fit MGZR up to 2004 model.

** SPECIAL OFFER**

Now only £30.00

SPECIAL OFFER ONLY £10 + VAT

Same as our classic 47mm diameter ferrari ball with GATE.
An ideal size for both quick changes & the ultimate aesthetic look.
Specially manufactured to our specifications in quality aluminium.
Also available in polished aluminium finish.

This design replaces the complete knob and will fit all MGF cars up to Sept 1999. These will also fit MGZR up to 2004 model.

** SPECIAL OFFER**

Now only £30.00

SPECIAL OFFER ONLY £10 + VAT

Same as our classic 47mm diameter ferrari ball with GATE.
An ideal size for both quick changes & the ultimate aesthetic look.
Specially manufactured to our specifications in quality aluminium.
Also available in anodised aluminium finish.

This new design replaces the complete knob and will fit all MGF from Sept 1999 and all MGTF's.

** SPECIAL OFFER**

Now only £30.00

This new design replaces the complete knob and will fit all MGF from Sept 1999 and all MGTF's.

** SPECIAL OFFER**

Now only £30.00

Made from Glass Reinforced Plastic.

This is a perfect addition to the MGF/TF.

Fits to the lower carpet secton of the door and makes the ideal storage for all those personal items that clutter the interior. Cut out section for drinks holder.

We can offer these in virtually any colour enablling you to add a stylish co-ordinated accessory that matches your luxury leather trim.
All chart colours in stock.
Please enquire if colour is not shown on chart to sales@mikesatur.com
Please note actual colours may vary slightly due to different screen resolutions.

Price per pair
Made to order 1-3days

Please press MORE for COLOUR CHART:

Switch Panel for MK2 MGFs & MGTFs manufactured from aluminium with a brushed Anodised finish.

Manufactured specially for every MG. This octagon shaped holder is cnc machined from solid aluminium billet and anodised for corrosion resistance and has stainless allen headed screw detailing.

This item sits at the top of the gear gaiter and is easily fitted.

This item sits at the top of the gear gaiter and is easily fitted.

New Design! In house design and manafacture of these superb CNC machined gear knobs, makes changing gear a pleasure!
Gear gate machined into top face.
Screw on.

** SPECIAL OFFER** Save £6.00 now £18.00

New Design! In house design and manafacture of these superb CNC machined gear knobs, makes changing gear a pleasure!
Gear gate machined into top face.
Screw on.

**SPECIAL OFFER** Save £6.00 now £18.00

Replacement studs for T-bar section. Price per 1.

Price per cap. 4 required per car.

NEW OFFER WAS £21 NOW £12.50 WHILST STOCKS LAST

This classic 47mm diameter ball is the ideal size for both quick changes & the ultimate aesthetic look. Specially manufactured to our specifications.
Also available in polished aluminium.

Gear Knob

Made from billet aluminium and finished in either polished or brushed finish. These trims replace the plastic guides in the T-bar. Price per pair.

Made from billet aluminium and finished in either polished or brushed finish. These trims replace the plastic guides in the T-bar. Price per pair.

An original design by Mike Satur - Keeps Seat Belt in correct position and prevents chaffing the neck.

BUY BOTH & SAVE £7.00

1 PAIR Seat BeltTidy's (new design, see picture on Seat Belt Tidy item)
1 PAIR Seat Belt Escutcheons

Switch Panel for MK2 MGFs & MGTFs manufactured from aluminium with a polished Chrome finish.

NEW DESIGN!!! HEXAGON SHAPE!!

This new design is made from Hex Bar that evokes the multi-faceted MG Octagon and is much more tactile than our previous design.
Fed up of losing your seat belt around the back of your seat, or having it slide up your neck? then this handy device will cure your problems by keeping the seat belt in the correct position preventing chaffing.
Easy fitted to the headrest/restraint support leg and easily adjusted for height and angle.

An original design by Mike Satur - beware of cheap copies that may cause injury or incorrect seatbelt operation!!!

An original design by Mike Satur - Keeps Seat Belt in correct position and prevents chaffing the neck.

BUY BOTH & SAVE £7.00

1 PAIR Seat BeltTidy's (new design, see picture on Seat Belt Tidy item)
1 PAIR Seat Belt Escutcheons







Buy the Seat Belt Tidy and the Excutcheon
together and save £7.00

NEW DESIGN!!! HEXAGON SHAPE!!

This new design is made from Hex Bar that evokes the multi-faceted MG Octagon and is much more tactile than our previous design.
Fed up of losing your seat belt around the back of your seat, or having it slide up your neck? then this handy device will cure your problems by keeping the seat belt in the correct position preventing chaffing.
Easy fitted to the headrest/restraint support leg and easily adjusted for height and angle.

An original design by Mike Satur - beware of cheap copies that may cause injury or incorrect seatbelt operation!!!

Fit from Sept 1999 MGF models and all MGTF models (except 1.6 models)
Price per pair.

Fit from Sept 1999 MGF models and all MGTF models (except 1.6 models)
Price per pair.

Factory part for all MGFs and TF 1.6, direct fit, no modifications. Uses 100x150 speakers (NOT SUPPLIED)

To enhance internal sound system with additional speakers behind seat area.
(Fits behind rear T.Bar trim panel)

VALENTINE OFFER - was £13.00 now £10.00

Switch Panel for MK2 MGFs & MGTFs manufactured from aluminium with a brushed Anodised finish.

MGF MK1 to Nov 1999.

Switch Panel for MK2 MGFs & MGTFs manufactured from aluminium with a polished Chrome finish.

MK1 Aluminium Switch Panel (No Air Con)

MK1 Switch Panel with Air Con. Anodised finish

The cowl is geniune carbon fibre and is on an exchange basis.

Price includes a refundable £20 surcharge.
Just return your original cowl to us and on receipt we will refund the surcharge.

Made to order - lead/time is between 3 to 4 weeks.

The cowl is geniune carbon fibre and is on an exchange basis.

Price includes a refundable £20 surcharge.
Just return your original cowl to us and on receipt we will refund the surcharge.

Made to order - lead/time is between 3 to 4 weeks.

Please note these are geniune carbon fibre air vents. These are made to order on an exchange basis. We charge a surcharge until we get your original air vents back, then this will be refunded. Please note there is a 3-4 week turn around time on this item.

Please note: This price includes a £90.00 surcharge which is refunded once the existing Air Vents are returned.
Please note there is a 2 week lead time on this item.

MGF from Sept 1999 onwards & all MGTF's (except 1.6 models which do not have the tweeters).
Machined from billet aluminium with 8 dimples these trims can be fitted in a few seconds without any tools.
They can be removed without damage if required.

Now only £40.00

MGF from Sept 1999 onwards & all MGTF's (except 1.6 models which do not have the tweeters).
Machined from billet aluminium with 8 dimples these trims can be fitted in a few seconds without any tools.
They can be removed without damage if required.

Now only £40.00

MK2 Door Pods in choice of leather.

We can offer these in virtually any colour enablling you to add a stylish co-ordinated accessory that matches your luxury leather trim.
All chart colours in stock.
Please enquire if colour is not shown on chart to sales@mikesatur.com
Please note actual colours may vary slightly due to different display settings.

Press MORE for COLOUR CHART: