Online Catalogue | MGTF | Service/Spare Parts
Quantity:
Latest spec. replacement Engine Hose. Connects cylinder head outlet pipe to underfloor coolant pipes and heater.Fits MGF and TF's up to pre P.R.T. thermostat.
Replace at Cam belt change, check condition every 6 months.
Advise replacing this item when changing cambelts. TIP: Check tensioner pulley, if worn replace with Part No: ET60055
Apprx. 140mmx290mm replaces standardfilter, advise changing every 6,000 -10,000 miles or service interval. TIP: For long term economy and improved airflow use replacement foam filter PP155 ourStock No ET6870 - £32.00 plus VAT
Made by Piper Cams, heavy duty for longer wear and tear.TBP17 VVC/TF160 all yrs/MPI (96-99), manual adjustor.
GTB1416XSVVC, TF160 all years, MPI 1996-1999Manual
Fits all VVC engine cars. Advise ordering - cam bolt kit (Stock Code ET5560 - £10.50 plus VAT) when replacing cam belts.
Made by Piper Cams, heavy duty for longer wear and tear.For post 2000 approx auto tensioner engines.Please check before ordering your car has black cambelt auto tensioner .
GTB801497XSFor approx. post 2000 auto tensioner engines.Please check before ordering your car has black cambelt auto tensioner .
Fits early MPI and all VVC engine cars. Advice replacing this when changing cambelt.*** SPECIAL OFFER - SAVE £8.00***
As fitted to late MGF and TF models. Non VVC.
Advise replacing retaining bolt for the tensioner at each cam belt change. Fits all non VVC.
K-series engine cam gear locking tool. Essential when changing cambelt.
Replace the standard coolant pipes which corrode and deteriorate with these uprated stainless steel ones for longer lasting wear and tear.*** ON SPECIAL OFFER***
NEW LOWER PRICE WAS £4.80 + VATCoolant bottle expansion cap. We recommend these are changed at service intervals to maintain correct cooling system pressure.OE PART: PCD100160
Top quality Bosch replacement part.
Price per 1.
When replacing the under floor cooling pipes or radiator it is also advisable to change the hose clamps. 4 required when changing coolant pipes, 2 for radiator. Price per 1.
Original equipment part, guaranteed quality.*please note that you may be supplied with an alternative of matching quality (ISO 9000 / TS16949) to the MG Rover Part without invalidating warranty conditions.
Advisable to use at service intervals.
Pulley tensioner for air con models only. Part Number - PQR10028.
At last a replacement for the stock plastic radiator bleed screw. The stock screw can break and cause coolant loss with catastrophic results. This Mike Satur design eliminates the need to remove the screw as it has a bleed nipple machined into the aluminium screw. It also enables coolant to be bled easily using tubing without coolant spilling onto the body work. Every MGF/TF should have one!! Please Note: This item fits the standard radiator's only.
**SPECIAL EXTENDED OFFER****NOW ONLY £59.00****Was £106.00 saving £47.00**Replace copper core radiator with high efficiency aluminium cord. Please Note: 2 x 32-50mm hose clips are required when changing the radiator (part number ET5060-37-40).12mths Warranty
Often a source ot temperature spiking and intermittent coolant loss. Advise replacement if problems with cooling system. Please note that equivalent part of equal quality may be sent due to the Rover original part being unobtainable.
Steering rack track rod end. Frequently knocked out with speed bumps and pot holes. Symptoms are wandering or knocking from front end. Excessive wear will cause MOT failure.
Top quality replacement water pump.***SPECIAL OFFER***
Wiper Blade drivers side, original part, comes complete with wind deflector.
Passenger side wiper blade. Original part
Direct replacement for original part. Top quality part.Fits all MGF's and MGTF's.Priced per wheel.**SPECIAL OFFER - PRICE REDUCED FROM £35 to £25 - LIMITED STOCK**
Wiper Motor for the TFLead-time 3-5 days from date of order.
